InstruTECH downloads

 

Driver files and software are divided into categories.  Please note that there may be more than one choice depending on operating system requirements.  If there is a file that is missing from this page please send email to support@heka.com

 

Product manuals and literature can be downloaded from the Products List page.

 

Windows Drivers (Vista and XP)

Name
Description
Version
Date

 

 

 

 

ITCWindows_XP_Vista

Windows inf driver installer for ITC-16, ITC-18 and ITC-1600. Including OEM versions built into the Heka EPC 9, EPC 10 and EPC 10Plus amplifiers. Supports Windows XP and Vista only. Also installs the utility programs ITCUpdater, ITCDemoG and ITCControl.  Please note that this installer uses the Windows Device Manager, a setup program is not included as in previous versions.

20.17

11/21/07 

 

 

 

 

 

Windows Drivers (Pre Vista)

Name
Description
Version
Date

 

 

 

 

ITCWindows

Windows driver installer for ITC-16, ITC-18 and ITC-1600, including OEM versions built into the Heka EPC 9, EPC 10 and EPC 10Plus. Supports Windows 98, ME, NT, 2000 and XP. Please note that this installer WILL NOT work on Vista systems.  This version is the last driver release that supports Windows 98, ME and NT, as well as the AT-16 and AT-18 host interfaces.

20.14

10/20/06 

 

 

 

 

 

MacOS X Drivers (PPC and Intel)

Name
Description
Version
Date

 

 

 

 

ITCMacOSX_Intel

MacOS X (10.4 and above) driver installer for ITC-16, ITC-18 and ITC-1600. Including OEM versions built into the Heka EPC 9, EPC 10 and EPC 10Plus amplifiers. Supports Apple Computers with either an Intel or PPC processor.

20.17

1/10/08 

 

 

 

 

 

MacOS X Drivers (PPC only)

Name
Description
Version
Date

 

 

 

 

ITCMacOSX_PPC

MacOS X (10.2 and above) driver installer for ITC-16, ITC-18 and ITC-1600, including OEM versions built into the Heka EPC 9, EPC 10 and EPC 10Plus. Supports Apple computers with PPC processors only.

20.16

3/26/07 

 

 

 

 

 

IGOR Pro XOP’s for Windows

Filename
Description
Version
Date

 

 

 

 

ITC-Universal

ITC-16, ITC-18 and ITC-1600 xop for the Windows version of IGOR Pro. Please note that this xop is based on our universal driver and older ITC-16 and ITC-18 XOP calls are not supported. Includes help file and demo macros.  The ITC driver is also required.

3.1

10/6/06 

 

 

 

 

ITC-18

ITC-18 xop for the Windows version of IGOR Pro. Please note that this version supports the original XOP calls with additional support for the USB-18 host interface.  Includes help file and demo macros.  The ITC driver is also required. Version 7.6 fixes a wave size checking error in the procedure ITC18_RunDynamicClamp.

7.6

6/21/07

 

 

 

 

ITC-16

ITC-16 xop for the Windows version of IGOR Pro. Please note that this version supports the original XOP calls with additional support for the USB-18 host interface.  Includes help file and demo macros.  The ITC driver is also required.

7.5

7/25/06

 

 

 

 

 

IGOR Pro 6 XOP’s for MacOS X (PPC and Intel)

Filename
Description
Version
Date

 

 

 

 

ITC-Universal_V6

ITC-16, ITC-18 and ITC-1600 xop for MacOS X (10.4 and above).  This version supports both PPC and Intel Mac’s.  IGOR Pro version 6 is also required.  Please note that this xop is based on our universal driver and older ITC-16 and ITC-18 XOP calls are not supported. Includes help file and demo macros.  The ITC driver is also required.

3.1

2/5/07 

 

 

 

 

ITC-18_V6

ITC-18 xop for MacOS X (10.4 and above).  This version supports both PPC and Intel Mac’s.  IGOR Pro version 6 is also required. Please note that this version supports the original ITC-18 XOP calls with additional support for the USB-18 host interface.  Includes help file and demo macros.  The ITC driver is also required.

7.6

6/21/07 

 

 

 

 

ITC-16_V6

ITC-16 xop for MacOS X (10.4 and above).  This version supports both PPC and Intel Mac’s.  IGOR Pro version 6 is also required. Please note that this version supports the original ITC-16 XOP calls with additional support for the USB-16 host interface.  Includes help file and demo macros.  The ITC driver is also required.

7.5

2/5/07 

 

 

 

 

 

IGOR Pro XOP’s for MacOS X (PPC only)

Filename
Description
Version
Date

 

 

 

 

ITC-Universal

ITC-16, ITC-18 and ITC-1600 xop for MacOS X (10.2 and above).  This version supports PPC Mac’s only.  IGOR Pro version 5 and above is also required.  Please note that this xop is based on our universal driver and older ITC-16 and ITC-18 XOP calls are not supported. Includes help file and demo macros.  The ITC driver is also required.

3.1

11/28/06 

 

 

 

 

ITC-18

ITC-18 xop for MacOS X (10.2 and above).  This version supports PPC Mac’s only.  IGOR Pro version 5 and above is also required. Please note that this version supports the original ITC-18 XOP calls with additional support for the USB-18 host interface.  Includes help file and demo macros.  The ITC driver is also required.

7.5

7/24/06 

 

 

 

 

ITC-16

ITC-16 xop for MacOS X (10.2 and above).  This version supports PPC Mac’s only.  IGOR Pro version 5 and above is also required. Please note that this version supports the original ITC-16 XOP calls with additional support for the USB-16 host interface.  Includes help file and demo macros.  The ITC driver is also required.

7.5

7/24/06 

 

 

 

 

 

Windows Software and Demo’s

Filename
Description
Version
Date

 

 

 

 

ECELL

ECELL, extra cellular acquisition software for Windows. Supports ITC-16, ITC-18, ITC-1600, USB-16 and USB-18 interfaces.  This software is now available for free download.  A license file is required which can be obtained by sending email to support@heka.com.  Please specify the interface type and the serial number.  The ITC driver is also required.

2.14

1/27/07 

 

 

 

 

AcquireT

Acquire continuous acquisition program for Windows.  Supports ITC-16, ITC-18, ITC-1600, USB-16 and USB-18.  The ITC driver is also required.

6.0

1/8/07

 

 

 

 

ITC_Scope

Two channel oscilloscope application written in LabView for Windows.  Supports ITC-16, ITC-18, ITC-1600, USB-16 and USB-18.   Please note that a copy of LabView is not required.  The scope installer will install the LabView 6 runtime engine as well.  The ITC driver is also required.

1.1

9/22/04 

 

 

 

 

ITC18PCI DemoApp

Demo applications written for the ITC-18 with PCI host interface.  These demo’s were written in LabView but do not need LabView to execute.  The demo applications include two oscilloscope and a function generator.  LabView source is available.  Please note that the ITC driver is also required.

 

 

 

 

 

 

 

MacOS X Software and Demo’s

Filename
Description
Version
Date

 

 

 

 

AcquireT

Acquire continuous acquisition program for MacOS X (Intel and PPC).  Supports ITC-16, ITC-18, ITC-1600, USB-16 and USB-18.   The ITC driver is also required.

6.0

9/25/06

 

 

 

 

 

MacOS Classic (9.0) Software and Demos

Filename
Description
Version
Date

 

 

 

 

PulseControl

Pulse Control XOP's.  Supports ITC-16 and ITC-18 only!

5.05a

11/11/1999

 

 

 

 

PulseControl Manual

Pulse Control manual.